DPA-5075MN
Networked controlled power amplifier
As facilities such as large campus style real-estates and multi-level building get larger, the requirement to get voice communication and paging across long distances also increases
-
Features
- Independent SMPS Modular Amplifier. Each amplifier channel is completely independent of each other. Even when the amplifier frame is loaded with more than one amplifier module, models can safely be changed without affecting the other.
- N+1 instantaneous amplifier switch-over. Amplifier consists of 4(Main) + 1(Back up). Upon failure of an amplifier the automatic detection will switch-over to the backup amplifier seamlessly. This will happen even while the power is on.
- 4 x4 matrix network controlled amplifier
- Amplifier bridging increase output power. For examples: 75W X 4CH, 150W X 2CH, 225W X 1/75W X 1CH, 300W X 1CH
- Each amplifier has a power on/off switch allowing for unused amplifiers to be powered off for energy saving.
- AC & DC dual power operation. Normal power operation via the AC 117v or 220v electrical power input. Amplifier will switch automatically to DC24V battery backup supply input when AC power is interrupted.
- A back-up test switch allows for confirmation of switch-over functionality
- Overheat, overflow, speaker shortage and module socket contact protection circuitry.
- Signal, Clip, and Protect LED display monitoring of the amplifiers
- HPF(High Pass Filter) for protection of speaker and voice intelligibility: 65Hz / 400Hz (-3dB)
- Input Trim control on each amplifier 0 dB ~ -12 dB (factory default) or 0 dB ~ Minimum
- Connection and cabling is made easy using removable screw type Euroblock terminals for connection to input and output terminals
- A user-friendly GUI facilitates controlling and monitoring of the amplifier.
- Network TCP/IP port and Digital Network audio from AOE-212N
- TCP/IP Networked amplifier remote control and monitoring
- Up to 20 amplifier frames can be monitored with the included software
- Ethernet Audio input.
- Digital network audio
- High Definition Audio with S/N better than 70dB and THD less than 1%
Product Description
As facilities such as large campus style real-estates and multi-level building get larger, the requirement to get voice communication and paging across long distances also increases. Power amplifiers must now be installed locally and within its zone of operation. Sending Audio and controlling amplifies remotely via network technology is now possible. Inter-M now offers Digital Networked controlled amplifiers and Audio transmission devices. The DPA-5075MN is a networked controlled power amplifie
Tech Specs
- Rated Output
- 75W x 4Channel
- Output Voltage/Impedance
- 100V / 133.3 ?
- Input Sensitivity/Impedance
- 1V / 10k ? Balance
- THD (AES17)
- Rated Output Power (75W, 1kHz)
- Analog Input : 1% / Network Input : 1%
- 1/3 Rated Output Power (25W, 1kHz)
- Analog Input : 0.07% / Network Input : 0.2%
- S/N (20kHz LPF, A-WTD)
- Analog Input : 90dB / Network Input : 70dB
- High Frequency Response (1W, -3dB+1dB)
- 20kHz
- Operating Temperature
- -10 ? ~ +40 ?
- Power Source
- AC 220 ~ 240V, 50/60Hz, DC 24V
- Power Consumption (1/8 P rated)
- 130W (Main set + Module 5EA),
- 50W (Main set + Module 2EA)
- Weight(SET)
- FULL SET (MAIN SET + AMP MODULE 5EA) : 16.5kg
- MAIN SET + AMP MODULE 2EA : 10.8kg
- AMP MODULE 1EA: 1.9kg
- Dimensions (Set)
- 482(W) X 88(H) X 420(D)mm
